Today
Secret
Unspecified
Unspecified
Aerospace and Aviation
OK (On-Site/Office)
Duties
DUTY 1: Performs work planning responsibilities. Plans use of workers, equipment, facilities, and materials on a daily or by project basis.
DUTY 2: Performs work direction responsibilities. Assigns work to individuals and provides technical direction and/or help in accomplishing difficult work steps and processes.
DUTY 3: Performs Administrative responsibilities. Participates with employees in the development of performance plans and recommends them to supervisors.
DUTY 4: Applies Equal Employment Opportunity (EEO)/Equal Opportunity Treatment (EOT) principles and requirements.
DUTY 5: Ensures education in, compliance with, and practice of security directives, good safety, and health habits in all work areas.
DUTY 6: Reserve Training. Administers the reserve training and quality program for element ensuring consistent standards throughout the element for traditional reservists and ARTs.
Requirements
Conditions of employment
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C for WG-8800 Aircraft Overhaul Family.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-8800 Aircraft Overhaul Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is: the ability to supervise as an AIRCRAFT ELECTRICIAN SUPERVISOR.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of a wide range of principles, processes, and techniques of aircraft repair, modification, and inspection.
2. Knowledge of personnel management policies, practices, and procedures, including sexual harassment and EEO/ EET.
3. Knowledge of safety regulations, practices, and procedures.
4. Knowledge and skill in using and maintaining a variety of hand power tools, equipment and precision measuring and/or test equipment.
5. Knowledge and ability in troubleshooting, inspecting, and/or tracing hard-to-locate defects or problems.
6. Ability to read and interpret blueprints, diagrams, sketches, and technical specifications.
7. Ability to plan and organize work assignments to include determining resources required to accomplish mission.
8. Ability to communicate effectively, both orally and in writing.
9. Knowledge of assigned weapon systems including airframes, aircraft systems, and the interrelationships among systems and aircraft power plants, needed to make various operational checks and verify established performance limits.
10. To perform a variety of inspections to include in process inspections, preflight/basic post flight, thru-flight, and home station checks.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
FUNCTIONAL REQUIREMENTS:
The work requires moderate to strenuous effort. Must stand, stoop, bend, and reach for extended periods of time. Frequently handles items weighing up to 20 pounds, and often lift and carry assemblies weighing up to 50 pounds. Hoists, hand trucks, lifts, and other employees are available to assist when handling heavy or awkward items. May be required to climb steps and ladders and stand on slippery or inclined surfaces.
ENVIRONMENTAL FACTORS:
Work is performed in hanger areas, outdoors, in parked aircraft, and sometimes in hazardous noise areas. Exposed to extremes in heat, cold, humidity and inclement weather. Must work in confined areas and in awkward positions. Exposed to dirt, grease, and aircraft fluids, oil, hydraulic fluid, solvents, and hazardous fluids and gases such as Hydrazine and Halon. Subject to cuts, bruises, muscle strain, and injury from falls off scaffolds, ladders, and aircraft surfaces. Slippery or uneven walking surfaces. Working around machinery with moving parts. Working around moving objects or vehicles. May be exposed to intake suction and hot exhaust blast. Working closely with others. Working alone.
Education
This job does not have an education qualification requirement.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
Current Federal Civilian employees may apply for temporary and term positions and if selected, a break in service may be required prior to appointment to the position.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Incentives: Recruitment and/or retention incentives may or may not be used.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
Tax Law Impact for PCS: On 22-Dec-2017, Public Law 115-97 - the "Tax Cuts and Jobs Act of 2017" suspended qualified moving expense deductions along with the exclusion for employer reimbursements and payments of moving expenses effective 01-Jan-2018 for tax years 2018 through 2025. When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit GSA Bulletin FTR 20-04 for additional information.
DUTY 1: Performs work planning responsibilities. Plans use of workers, equipment, facilities, and materials on a daily or by project basis.
DUTY 2: Performs work direction responsibilities. Assigns work to individuals and provides technical direction and/or help in accomplishing difficult work steps and processes.
DUTY 3: Performs Administrative responsibilities. Participates with employees in the development of performance plans and recommends them to supervisors.
DUTY 4: Applies Equal Employment Opportunity (EEO)/Equal Opportunity Treatment (EOT) principles and requirements.
DUTY 5: Ensures education in, compliance with, and practice of security directives, good safety, and health habits in all work areas.
DUTY 6: Reserve Training. Administers the reserve training and quality program for element ensuring consistent standards throughout the element for traditional reservists and ARTs.
Requirements
Conditions of employment
- U.S. Citizenship Required
- Males must be registered for Selective Service, see www.sss.gov
- A Secret security clearance required
- If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
- This posn is subject to provisions of the DoD Priority Placement Program
- Position may be subject to random drug testing
- An appropriate, valid driver's license may be required for the position
- Disclosure of Political Appointments
- Must be a current member of the AF Reserve or willing/qualified to join
- Superior Quals= Advance in hire may be authorized if there is demonstrable proof provided on your resume
- Recruitment Incentive may be authorized for this position
- Relocation Incentive may be authorized for this position
- Leave accrual may be authorized upon request
- Direct Deposit: All federal employees are required to have direct deposit.
- May be required to fly in commercial and military aircraft to perform temporary/permanent duty assignments.
- AFSC: 2A5X0
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C for WG-8800 Aircraft Overhaul Family.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-8800 Aircraft Overhaul Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is: the ability to supervise as an AIRCRAFT ELECTRICIAN SUPERVISOR.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of a wide range of principles, processes, and techniques of aircraft repair, modification, and inspection.
2. Knowledge of personnel management policies, practices, and procedures, including sexual harassment and EEO/ EET.
3. Knowledge of safety regulations, practices, and procedures.
4. Knowledge and skill in using and maintaining a variety of hand power tools, equipment and precision measuring and/or test equipment.
5. Knowledge and ability in troubleshooting, inspecting, and/or tracing hard-to-locate defects or problems.
6. Ability to read and interpret blueprints, diagrams, sketches, and technical specifications.
7. Ability to plan and organize work assignments to include determining resources required to accomplish mission.
8. Ability to communicate effectively, both orally and in writing.
9. Knowledge of assigned weapon systems including airframes, aircraft systems, and the interrelationships among systems and aircraft power plants, needed to make various operational checks and verify established performance limits.
10. To perform a variety of inspections to include in process inspections, preflight/basic post flight, thru-flight, and home station checks.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
FUNCTIONAL REQUIREMENTS:
The work requires moderate to strenuous effort. Must stand, stoop, bend, and reach for extended periods of time. Frequently handles items weighing up to 20 pounds, and often lift and carry assemblies weighing up to 50 pounds. Hoists, hand trucks, lifts, and other employees are available to assist when handling heavy or awkward items. May be required to climb steps and ladders and stand on slippery or inclined surfaces.
ENVIRONMENTAL FACTORS:
Work is performed in hanger areas, outdoors, in parked aircraft, and sometimes in hazardous noise areas. Exposed to extremes in heat, cold, humidity and inclement weather. Must work in confined areas and in awkward positions. Exposed to dirt, grease, and aircraft fluids, oil, hydraulic fluid, solvents, and hazardous fluids and gases such as Hydrazine and Halon. Subject to cuts, bruises, muscle strain, and injury from falls off scaffolds, ladders, and aircraft surfaces. Slippery or uneven walking surfaces. Working around machinery with moving parts. Working around moving objects or vehicles. May be exposed to intake suction and hot exhaust blast. Working closely with others. Working alone.
Education
This job does not have an education qualification requirement.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
Current Federal Civilian employees may apply for temporary and term positions and if selected, a break in service may be required prior to appointment to the position.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Incentives: Recruitment and/or retention incentives may or may not be used.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
Tax Law Impact for PCS: On 22-Dec-2017, Public Law 115-97 - the "Tax Cuts and Jobs Act of 2017" suspended qualified moving expense deductions along with the exclusion for employer reimbursements and payments of moving expenses effective 01-Jan-2018 for tax years 2018 through 2025. When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit GSA Bulletin FTR 20-04 for additional information.
group id: DOAF
