SUPERVISORY GENERAL ENGINEER

Duties

• Serves as Deputy Director in support of the 505 CTG Commander and Staff with responsibility for direction of CTG Staff and facilities, as well as the oversight of squadron mission, personnel, and funding programs and requirements.
• Exercises supervisory personnel management responsibilities and acts as the senior civilian leader to the military group commander and subordinate squadron commanders.
• As Deputy Director, assists in planning, organizing, and overseeing the activities of the unit.
• Serves as a technical advisor in the orchestration of synergy across the CTG in solution-oriented approaches to unique/challenging/complex operational C2 and ISR problems (including the integration of Air, Space, Cyber, and ISR into the C2 and ISR construct) through exercises, evaluation, TTP development, training, experimentation, and M&S, by championing test/exercise integration and standardization.

Requirements

Conditions of employment

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
• This position is subject to provisions of the DoD Priority Placement Program
• Position may be subject to pre-employment and random drug testing
• A professional engineering degree at the bachelor's level or above from an ABET accredited institution is highly desired.
• Work may occasionally require travel away from the normal duty station on military or commercial aircraft.
• Disclosure of Political Appointments
• Advance in hire may be authorized if there is demonstrable proof provided on your resume
• Recruitment Incentive may be authorized for this position
• Relocation Incentive may be authorized for this position
• Leave accrual may be authorized upon request
• Depending on the type of position (competitive/excepted) you are selected for, you will be required to serve a 1-year probationary period OR 2-year trial period.
• Upon completion of your probationary/trial period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
• Required to serve a one-year supervisory probationary period.
• This position is designated as an acquisition position covered by the Acquisition Professional Development Program (APDP). Must acquire and maintain the certification(s) Level 2 or 3 in an area such as...cont'd
• Test and Evaluation; Systems Planning, Research, Development, and Engineering-Systems Engineering; or Systems Planning, Research, Development, and Engineering-Program Systems Engineer.
• Position is designated special-sensitive and requires eligibility for access to Sensitive Compartmented Information (SCI), other intelligence-related Special Sensitive information...cont'd
• or involvement in Top Secret Special Access Programs (SAP) to fully perform the duties and responsibilities of the position. A non-disclosure agreement must be signed.

Qualifications

In order to qualify, you must meet the basic requirement and specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Professional and Scientific Positions

BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT:
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

YOU MUST PROVIDE TRANSCRIPTS

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-13, or equivalent in other pay systems. Examples of specialized experience includes coordinating with OSD, HQ USAF, and ACC offices for programs or projects for which they provide funding or oversight. Participates on, and leads, teams to establish policies and goals for C2 and ISR systems training, experimentation, and capability enhancement and integration. Oversees all group contracts and advises the commander on contractual obligations concerning personnel and non-personnel matters. Establishes, revises, or reviews policies, procedures, mission objectives, and organization design for the staff and subordinate units, as necessary to eliminate work problems or barriers to mission accomplishment, promote team building, implement quality improvements, or in response to concerns with regulatory compliance and/or customer requirements. Supervises, coordinates, and oversees work through interaction with Commanders and squadron supervisors.

FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-13 level is required to meet the time-in-grade requirements for the GS-14 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements.

KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

1. Knowledge of planning and program management to execute major projects, provide expert advice to colleagues, and present innovative recommendations for advancing programs and/or methods, as well as financial and operational management to execute projects within resource constraints.
2. In-depth knowledge of and experience in military Command and Control, including Joint All-Domain Command and Control (JADC2) and Advanced Battle Management System (ABMS) is required. This knowledge should encompass both operational and technical aspects of warfighting at the operational and tactical level of warfare, intelligence processes, sensors, networks, C2 nodes, and current and emerging C2 technologies.
3. Knowledge of the theories, concepts, principles, practices, standards, methods, techniques, and materials of professional multidisciplinary engineering to effectively apply advanced engineering principles and concepts to new applications, experimental theories, and other areas of responsibility, especially related to Command and Control.
4. Knowledge of safety, security, financial and personnel management, and EEO regulations, practices, procedures, legislation, and policies.
5. Ability to plan, organize, and direct the functions of an organization and mentor, motivate, and appraise the staff through subordinate supervisors.
6. Ability to analyze, plan, and adjust work operations of one or more organizational segments to meet program requirements and objectives within available resources.
7. Strong skill and ability to communicate clearly, concisely, and with technical accuracy, both orally and in writing, as well as work in a professional manner with peers, management, contractors, academia, and other agencies.
8. Ability to advise higher leadership using professional levels of skill, tact, and diplomacy.

Education

PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click to check accreditation.

FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.

Additional information

Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.

Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.

Current Federal Civilian employees may apply for temporary and term positions and if selected, a break in service may be required prior to appointment to the position.

120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.

Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.

Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.

Direct Deposit: All federal employees are required to have direct deposit.

is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .

If you have questions regarding this announcement and have hearing or speech difficulties click .